N2（A）及N（2D）对IF（X）的传能研究

在微波放电系统中,对NH_3-F-F_2-CF_3I体系进行研究,结果表明,向IF(X)传能的诸多媒介中,N_2(A)及N(~2D)起着主要作用,并且这一结论在经微波激发后的N_2与CF_3I的直接反应中得到了进一步证实。     

General Information

In this paper, we propose and analyze an SQP-type method for solving linearly constrained convex minimization problems where the objective functions are too complex to be evaluated exactly. Some basic results for global convergence and local superlinear convergence are obtained according to the properties of the approximation sequence. We illustrate the applicability of our approach by proposing a new method for solving two-stage stochastic programs with fixed recourse.     

CdZnTe核探测器的蒙特卡罗模拟的初步研究

以CdZnTe核探测器的工作原理为依据,探测器内反应的随机性和反应产生的电子空穴对数目的统计规律为物理模型,应用Visual C + + 自行编制了蒙特卡罗模拟软件.模拟了γ射线在CdZnTe探测器中的响应能谱,并将模拟结果与实际器件的测试结果进行了比较讨论.模拟能谱与实际测得的能谱的主峰符合较好.此外,通过分析⁵⁷Co源辐照下探测效率与器件厚度的关系,可以推测探测效率达到最大时所对应CdZnTe探测器的理想厚度     

On the successive supersymmetric rank‐1 decomposition of higher‐order supersymmetric tensors

In this paper, a successive supersymmetric rank‐1 decomposition of a real higher‐order supersymmetric tensor is considered. To obtain such a decomposition, we design a greedy method based on iteratively computing the best supersymmetric rank‐1 approximation of the residual tensors. We further show that a supersymmetric canonical decomposition could be obtained when the method is applied to an orthogonally diagonalizable supersymmetric tensor, and in particular, when the order is 2, this method generates the eigenvalue decomposition for symmetric matrices. Details of the algorithm designed and the numerical results are reported in this paper. Copyright © 2007 John Wiley & Sons, Ltd.     

On the structure of stationary sets

We isolate several classes of stationary sets of [k]ωand investigate implications among them. Under a large cardinal assumption, we prove a structure theorem for stationary sets.     

On meromorphic functions that share three values of finite weights

A uniqueness theorem for two distinct non-constant meromorphic functions that share three values of finite weights is proved, which generalizes two previous results by H.X. Yi, and X.M. Li and H.X. Yi. As applications of it, many known results by H.X. Yi and P. Li, etc. could be improved. Furthermore, with the concept of finite-weight sharing, extensions on Osgood-Yang's conjecture and Mues' conjecture, and a generalization of some prevenient results by M. Ozawa and H. Ueda, ect. could be obtained.     

基于联合变换相关器的Dempster-Shafer理论计算

提出了用联合变换相关器(JTC)来实现证据理论概率分配函数正交和的光学计算,在理论上对于如何用联合变像相关器实现证据理论分配函数正交和作了详细的讨论,并作了相应的仿真测试,结果显示该方法是可行的。与John Caulfield提出的用声光器件矢量外积实现的正交和计算相比,在该结构中由于采用二进制编码的数值计算,因此其计算精度得到了提高,同时对联合变换相关器输入端二进制编码的数值空间位置的适当调整可以直接得到所需要的证据理论正交和矢量,在处理步骤上得到了简化。     

500.8 nmNd∶YAG青光激光器光学薄膜的设计与制备

从双波长激光运转及和频的机理出发，对LD泵浦Nd∶YAG，LBO腔内和频500.8 nm〖JP2〗青光激光器所使用的光学薄膜进行了设计和制备.在激光反射镜的设计上，为了达到最佳的和频输出，对膜系要求进行了深入分析.采用对谐振腔一端面反射率固定不变并通过对另一腔镜基频光的透射率进行调谐的方法, 在给出合理初始结构后，利用计算机对膜厚进行了优化.并采用双离子束溅射沉积的方法，通过时间监控膜厚法成功制备出青光激光器所使用的全介质激光反射膜, 在室温下实现946 nm和1064 nm双波长连续运转，并通过Ⅰ类临界相位匹配LBO晶体腔内和频在国内首次实现500.8 nm青色激光连续输出.当泵浦注入功率为1.4 W时和频青光最大输出达20 mW.     

过量Zn对β-Zn4Sb3热电性能影响的研究

采用真空熔融缓冷方法制备了单相β-Zn4Sb3以及含有过量Zn的β-Zn4Sb3块体热电材料.在300—700K的温度范围内测试了材料的电导率、Seebeck系数和热导率,研究了β-Zn4Sb3化合物中过量Zn的分布状态及其对材料热电性能的影响规律.结果表明：过量的Zn作为第二相较均匀的分布在β-Zn4Sb3的晶界上,随着Zn含量增加,材料电导率和热导率上升,Seebeck系数下降,Zn第二相的引入能有效提高材料的功率因子,Zn过量2at%的材料在700K时其ZT值达到1.10.     

包含高阶摄动项的光学孤子演化方程的严格推导

利用奇异摄动多重尺度导数展开法,从非线性介质中的原始Maxwell方程组出发,导出了修正非线性schrdinger方程,给出了其不同形式的等价的两种表达式;同时还指出了Kodama利用约化微扰法推导此方程的不严格之处。